BA10 · NAPIT Approved · BS 7671 Section 701 · Part P Notified

Bathroom Electrician
in Bruton

Bathroom circuits in Bruton (BA10) — Section 701 zone planning, IP44+ everywhere, every circuit 30mA RCD-protected, electric showers, heated towel rails, IP-rated lighting, shaver sockets and extractors. Bruton bathroom electrician — high-end finish standard for BA10's high-spec residential. Section 701 IP44+, RCD-protected, NAPIT-certified. From £120 + VAT @ 20%.

Call Dan — 07889 334849 Free Site Survey
Or WhatsApp: wa.me/447889334849
Bathroom electrical install in Bruton — DS Electrical
NAPIT approved electrical contractorNAPIT
CHAS accredited contractorCHAS
City and Guilds qualified electricianCity & Guilds
TrustMark government endorsedTrustMark
Part P registered electricianPart P
BS 7671 18th Edition compliantBS 7671
What's included

What's wired in a Bruton bathroom

Bathroom circuits in Bruton (BA10) — Section 701 zone planning, IP44+ everywhere, every circuit 30mA RCD-protected, electric showers, heated towel rails, IP-rated lighting, shaver sockets and extractors. Bruton bathroom electrician — high-end finish standard for BA10's high-spec residential. Section 701 IP44+, RCD-protected, NAPIT-certified. From £120 + VAT @ 20%.

Full service detail and the eight-circuit kitchen brief on our parent Bathroom Electrics page.

Local Knowledge

Why bathrooms in Bruton are different

Bruton is BA10 — high-end residential with the Hauser & Wirth catchment driving demand for design-led bathrooms. Cable management, IP-rated fitting placement, switch positioning and isolator finish all matter visually as well as electrically.

Architect-designed bathrooms in converted barns and high-spec new-builds need close coordination on programme — we work to the architect's lighting brief and integrate with the rest of the design team.

Many BA10 bathrooms are in second homes or high-end holiday lets — we issue full landlord-pack documentation with every job.

Sister city pages: EICR in Bruton · Rewires in Bruton

Indicative pricing · from · VAT extra

Pricing ladder for Bruton

Final price depends on access, cable routes, existing wiring and whether the room is being refurbed at the same time. Survey is free; written quote is fixed. Read the disclaimer below the cards before assuming.

Quick

Bathroom extractor fan + spur

from £120
+ VAT @ 20% · from
  • IP44+ extractor fan
  • Mains-isolated fused spur
  • Run-on timer where required
  • Minor Works Certificate
Quick

Heated towel rail circuit

from £140
+ VAT @ 20% · from
  • Dedicated fused spur
  • FCU outside Zone 1/2
  • RCD-protected at consumer unit
  • Minor Works Certificate
Standard

IP65 LED downlights (4 lights)

from £180
+ VAT @ 20% · from
  • 4× IP65 sealed LED downlights
  • Zone-1/2-rated fittings
  • Drivers mounted accessibly outside zones
  • Lamps supplied
Standard

Shaver socket + LED mirror

from £280
+ VAT @ 20% · from
  • BS EN 61558 shaver socket outside zones
  • LED mirror with IR/touch switch
  • RCD-protected
  • Minor Works Certificate
Standard

Electric shower circuit (replace)

from £320
+ VAT @ 20% · from
  • Like-for-like 8.5kW or 9.5kW circuit
  • Pull-cord ceiling switch outside Zone 1
  • RCBO-protected at consumer unit
  • Minor Works or EIC issued
Refurb

Full bathroom electrics

from £550
+ VAT @ 20% · from
  • Extractor, lighting, shaver, towel rail
  • Section 701 zone-correct fittings throughout
  • All circuits 30mA RCD-protected
  • EIC + Part P notification via NAPIT
FAQ

Common questions

Do you work to architect's spec in Bruton?

Yes — Bruton bathrooms are typically architect-led, with detailed IP fitting schedules, switch positioning and lighting design. We work to spec, finish to match the design quality, and document everything for the build pack.

How long does a bathroom rewire take?

Single-circuit jobs (extractor, towel rail, shaver, mirror) are 1 day. A shower circuit replace is normally 1 day. A full bathroom rewire (extractor, lighting, shaver, towel rail, shower) is 2-3 days for first-fix and 1 day for second-fix after the tiling is in.

What is BS 7671 Section 701 and why does it matter?

Section 701 of BS 7671 is the special-locations chapter for rooms with baths and showers. It defines Zones 0, 1 and 2 around the bath/shower and dictates IP rating and what fittings are permitted in each zone. Zone 0 is inside the bath itself (12V SELV only). Zone 1 is above the rim (IP65, 30mA RCD). Zone 2 is the area within 0.6m of zone 1 (IP44 minimum). Outside zones is 'general' but RCD protection is still required on every circuit serving the bathroom.

Ready for a quote in Bruton?

Free survey, fixed-price written quote, full BS 7671 Section 701 certification. Call Dan directly on 07889 334849.

07889 334849
Email Us WhatsApp
Call Dan07889 334849 WhatsApp Email
Call Dan — 07889 334849