Hot tub and spa electrical install — BS 7671 Section 702 special location, dedicated 16A or 32A radial circuit with Type A 30mA RCBO, IP-rated isolator within sight of the tub, and outdoor-rated SWA cable run in protective duct. Suitable for plug-and-play 13A inflatable spas, hardwired single-pump tubs, twin-pump and swim-spa installs. Local cover for Bruton (BA10) and surrounding villages. From £280 + VAT @ 20%.
Or WhatsApp: wa.me/447889334849
NAPIT
CHAS
City & GuildsHot tub and spa electrical install — BS 7671 Section 702 special location, dedicated 16A or 32A radial circuit with Type A 30mA RCBO, IP-rated isolator within sight of the tub, and outdoor-rated SWA cable run in protective duct. Suitable for plug-and-play 13A inflatable spas, hardwired single-pump tubs, twin-pump and swim-spa installs.
Full service detail and the installation specification on our parent Hot Tub Electrics page.
Bruton (BA10) has become a destination village thanks to Hauser & Wirth Somerset and a wave of high-end refurbishments. Period stone cottages on the High Street, Georgian houses around the Dovecote, and converted barns in the surrounding hills are typical — hot-tub, shower and immersion work here is invariably high-spec, design-led and needs a careful, low-impact installation.
Sister city pages: EICR in Bruton · Bathroom electrics in Bruton
Final price depends on access, cable routes, existing wiring and scope. Survey is free; written quote is fixed. Read the disclaimer below the cards before assuming.
Yes. We've worked on properties in Bruton, Castle Cary and Pitcombe where the architect or interior designer expects neat, low-profile, first-fix work with everything documented. We provide drawings, test certs, photos of buried cable runs and a clean handover pack.
Yes — every hot tub circuit gets a Type A 30mA RCBO. Hot tubs use VFDs (variable frequency drives) for pump speed control, which generate DC residual currents that a Type AC RCD can't see. A Type A RCBO is mandatory under BS 7671 for any circuit with electronic motor control. We never use Type AC on hot tubs.
Distance isn't usually the limiting factor — cable size is. For a 32A run over 20m we'd typically use 6mm SWA; over 30m we'd up to 10mm to keep volt drop under 5%. We calculate this as part of the survey and confirm before pricing the cable run.
Free survey, fixed-price written quote, full BS 7671 certification. Call Dan directly on 07889 334849.
07889 334849