5.0
Google Rating · 13 reviews
15+
Years experience
£2M
Public liability cover
7
Accreditations
NAPIT Approved · Renovations, Extensions & Refurbishments

One electrician
for your whole renovation

Renovating, extending or refurbishing in Mid Somerset or Bath? DS Electrical plans and executes the entire electrical scope as one coordinated job — rewire, lighting design, EV charging, smart home, alarms and CCTV — designed with you in 3D, delivered under one fixed written quote, certified to BS 7671.

07889 334849
3D visualisation of a Somerset home at dusk with its full electrical scope planned by DS Electrical

A big renovation.
Five different sparkies.

On most renovations the electrical scope gets carved up by default — and nobody owns the design.

How it usually goes

The builder brings a sparky for first fix. An EV company quotes the charger. An alarm firm wires the detectors. A security company hangs the cameras. Someone else again is meant to make the "smart" lighting talk to the heating.

  • Four or five separate quotes, none of them looking at the whole house
  • Circuits added piecemeal to a consumer unit that was never designed for them
  • Walls closed up before anyone asked where the CCTV, network or EV cabling should run
  • When something doesn't work, every trade points at the other one
  • You become the project manager for your own electrics

How it should go

The electrical scope of a renovation is one system — it should be planned as one system, by one firm, before the first chase is cut.

One design covers the rewire, the lighting scheme, the EV circuit, the smart home wiring, the alarms and the CCTV together. Cable routes are agreed while the walls are open. The consumer unit is sized for everything from day one. One written quote covers the lot, and one accountable team delivers it — sequenced around your builder, plasterer and decorator.

That is the job DS Electrical does: the renovation electrician — the single point of responsibility for everything electrical in your project.

One plan. One quote.
One accountable team.

From the first idea to the final certificate, the whole electrical scope runs through one process.

01

Plan it together in 3D

Use our 3D install planner to spec your whole house room by room — real products, down to the socket finish. We refine it with you.

02

Free survey

We walk the property (or your architect's plans), check the supply, the consumer unit and the cable routes, and agree the scope with you and your builder.

03

One fixed written quote

The entire electrical scope on one itemised quote — labour, materials and certification on separate lines, VAT @ 20% shown separately. No surprises mid-build.

04

One team executes

Rewire, lighting, EV, smart home, alarms and CCTV installed by the same firm, sequenced with your other trades — first fix while walls are open, second fix and commissioning at the end.

05

Full certification

BS 7671 Electrical Installation Certificate, NAPIT Part P notification lodged with Building Control, and one tidy handover pack for the whole project.

The whole electrical scope.
Under one roof.

Everything below is planned, installed and certified by DS Electrical — no subcontracted specialists, no finger-pointing. All figures are indicative "from" prices + VAT, priced to your project after a free survey.

Full Rewire

from £4,500 + VAT

Complete rewire designed around your new layout — sockets, circuits and containment planned to the renovated floor plan, not the old one. First fix coordinated with your builder while walls and floors are open.

Consumer Unit

from £750 + VAT

A new board sized for the finished house — rewire, EV, garden, outbuildings and future circuits all allowed for from day one. RCBO protection throughout, fully tested and certified.

Lighting Design & Downlights

downlights from £35 per fitting + VAT

A proper lighting scheme for the whole project — layered kitchen lighting, fire-rated LED downlights, pendants, dimming and garden lighting, designed room by room in the 3D planner.

EV Charger

from £850 + VAT

Dedicated 32A circuit on a Type A RCBO, cable route planned before the driveway or landscaping goes in. DNO notification handled, full BS 7671 certification.

Smart Home

scene-ready circuits from £45 + VAT

Philips Hue lighting, Hive and Nest heating control — wired in properly during the renovation rather than retrofitted afterwards. Click Scolmore accessories in the finish you choose.

Smoke & Heat Alarms

priced to your project

Interlinked mains smoke and heat detection designed into the new layout — required when you extend or materially alter the property, and far cheaper to wire while the ceilings are open.

CCTV & Security

from around £1,200 fully installed

Hikvision camera systems with NVR recording and remote viewing via Hik-Connect. Camera positions and cable runs planned with the scaffolding still up.

Data & Wi-Fi

priced to your project

Wired network backbone and Wi-Fi access points cabled during first fix — the difference between a house that streams everywhere and one that doesn't.

DS Electrical chasing walls during a full house rewire on a Somerset renovation

First fix done right,
while the walls are open.

The cheapest time to wire a house properly is during the renovation. The most expensive time is six months after it's finished.

Two directors.
No call centre.

DS Electrical Installations (SW) Ltd is a two-director firm — Dan Stevens and Dan Street. The people who plan your project are the people who turn up and wire it.

01

You deal with the directors

No call centre, no franchise, no sales layer. You speak to Dan on 07889 334849, agree the scope with Dan, and Dan signs off the certificates at the end.

02

NAPIT approved — 66245

NAPIT-approved contractor with City & Guilds 2391 inspection & testing, TrustMark endorsement, Part P registration and full BS 7671 18th Edition compliance. £2M public liability cover.

03

The 3D planner nobody else has

Our free 3D install planner lets you spec the whole house with us — room by room, real products, down to the socket finish — before a single cable is pulled. You see the design; we quote exactly what you see.

04

One quote, itemised properly

Labour, materials and certification on separate lines, VAT @ 20% shown separately, the whole scope priced once. No drip-pricing as the build progresses.

05

Local to your project

Mid Somerset and Bath — Wells, Shepton Mallet, Frome, Bruton, Castle Cary, Midsomer Norton and the surrounding villages. Close enough to be on site when your builder needs us.

06

Certified and documented

BS 7671 Electrical Installation Certificate for the whole scope, NAPIT Part P notification to Building Control, and a single handover pack — certificates, schedules and photos in one place.

NAPIT approved electrical contractorNAPIT
City and Guilds qualified electricianCity & Guilds
TrustMark government-endorsed quality scheme logo for DS ElectricalTrustMark
Part P registered electricianPart P
BS 7671 18th Edition compliantBS 7671
Free — 3D Install Planner

Plan your whole renovation with us, in 3D.

Spec the entire electrical scope on a 3D model of your property — rewire, lighting, EV, smart home, alarms and CCTV, room by room, real products down to the socket finish — and DS Electrical Installations quotes it to your exact specification.

Plan your renovation in 3D

Renovating?
Talk to us first.

Free survey, one fixed written quote for the whole electrical scope, full certification. Call DS Electrical directly.

Direct Dan Stevens, Director: 07889 334849 Dan Street, Director: 07983 106928
Call DS Electrical07889 334849 WhatsApp Email
Call DS Electrical — 07889 334849