DWG PYI-26 · SECTION A–A
SUPPLY
ISOLATEDLIVE
DRAFTING…
Drag to orbit · tap a gold marker · add spaces from the palette below.
Every control has a keyboard route. Arrow keys orbit the 3D model, + / − zoom, Tab cycles the gold markers, Enter selects, Escape clears. Enter on a space marker steps inside the room — Tab then cycles its fixtures, and Escape steps back outside. Prefer not to drag at all? Every system and space is also in the system palette, add-a-space palette and circuit schedule below the model. Your whole multi-space spec travels with your quote request automatically.
BUILD YOUR SPEC — TAP A GOLD MARKER
Inside
Drag to orbit · scroll or pinch to zoom · tap a gold marker
KEY
EVEV charger
CUConsumer unit (fuseboard)
LTDownlights + lighting
SMSmart home
CCCCTV
ALAlarm
RWRewire
IREICR safety test
INStep inside a room
Lit at night — your lighting
CCTV recording
Alarm bell box
Gold marker = tap to add · ticked marker = in your plan, labelled on the model
Rewiring the whole house?
Build it room by room — sockets, lights and switches per room — and see an indicative budget instantly. Full rewires from £4,500 + VAT (small) · £6,500 (typical 3-bed) · £10,000 (large) — indicative, not a quote.
SWITCH ON A SYSTEM — GROUPED BY WHAT IT DOES
0 SYSTEMS ON
Tap to switch a system on — it takes its own way on the board below, builds into your spec sheet, and travels with your enquiry. Tap again to switch it off.
ADD A SPACE — SPACES & OUTDOOR
0 SPACES ADDED
Indoor
Outdoor
Each space you add appears on the model, gets its own way on the consumer unit, and becomes fully configurable in your spec sheet. Remove a space any time from its card.
DETAIL B — CONSUMER UNIT · ALL-RCBO · FLICK TO ADD
METAL CLAD · BS EN 61439-3
MAIN SWITCH
100A
SPD
STATUS
T2
CIRCUIT SCHEDULE — TAP A ROW TO ADD OR REMOVE
ALL CIRCUITS ISOLATED
⚠ 17+ ways — this plan outgrows a 16-way board. It needs an 18-way board or a second board; we confirm the right enclosure at survey.