BA5 · NAPIT Approved · BS 7671 18th Edition · Part P Notified

Kitchen Electrician
in Wells

Kitchen circuits in Wells (BA5) — cooker and induction hob radials, dedicated worktop ring main, LED downlights, under-cabinet lighting, Quooker spurs and BS 5839-6 heat detection. Local Wells electrician for kitchen circuits — cooker and induction hob, worktop sockets, LED downlights, Quooker spurs. BS 7671 18th edition, NAPIT-certified. From £140 + VAT @ 20%.

Or WhatsApp: wa.me/447889334849
Kitchen electrical install in Wells — DS Electrical
NAPIT approved electrical contractorNAPIT
CHAS accredited contractorCHAS
City and Guilds qualified electricianCity & Guilds
TrustMark government endorsedTrustMark
Part P registered electricianPart P
BS 7671 18th Edition compliantBS 7671

What's wired in a Wells kitchen

Kitchen circuits in Wells (BA5) — cooker and induction hob radials, dedicated worktop ring main, LED downlights, under-cabinet lighting, Quooker spurs and BS 5839-6 heat detection. Local Wells electrician for kitchen circuits — cooker and induction hob, worktop sockets, LED downlights, Quooker spurs. BS 7671 18th edition, NAPIT-certified. From £140 + VAT @ 20%.

Full service detail and the eight-circuit kitchen brief on our parent Kitchen Electrics page.

Why kitchens in Wells are different

Wells is England's smallest cathedral city — a tight historic core of stone-built terraces, cathedral school staff housing and a ring of suburban estates from Tor Hill to Wookey Hole. Kitchen work splits between heritage stone-wall installs in the centre and straightforward modern refurbs on the estates.

Wells has a heavy school, surgery and office mix in the BA5 postcode — many kitchens are commercial-domestic crossover (staff rooms, surgery breakrooms) and we issue full BS 7671 certification including any additional fire-detection ties to the building system.

Wells is on our doorstep — same-day callouts on cooker faults and emergency isolations are standard.

Sister city pages: EICR in Wells · Rewires in Wells

Pricing ladder for Wells

Final price depends on access, cable routes, existing wiring and whether the room is being refurbed at the same time. Survey is free; written quote is fixed. Read the disclaimer below the cards before assuming.

Quick

Boiling-water-tap circuit + isolator

from £140
+ VAT @ 20% · from
  • Dedicated 13A spur
  • Above-worktop isolator switch
  • Fused connection unit behind cabinet
  • Minor Works Certificate
Quick

Extractor fan circuit + isolator

from £140
+ VAT @ 20% · from
  • Mains-isolated cooker hood spur
  • Switched fused connection unit
  • Run-on timer where required
  • Minor Works Certificate
Standard

Under-cabinet LED + driver

from £220
+ VAT @ 20% · from
  • LED strip or bar under wall units
  • Driver in vented top cupboard
  • Worktop or sensor switching
  • Lamps / driver supplied
Standard

Cooker circuit (replace existing 32A)

from £220
+ VAT @ 20% · from
  • Like-for-like 32A radial replacement
  • 4mm or 6mm cable to suit cooker
  • 45A cooker control unit
  • Minor Works or EIC issued
Standard

Worktop sockets (4 new doubles)

from £280
+ VAT @ 20% · from
  • 4× double sockets, USB optional
  • Spurred from kitchen ring main
  • Min 300mm clear of sink edge
  • Minor Works Certificate
Standard

LED downlights (6 lights)

from £380
+ VAT @ 20% · from
  • 6× sealed dimmable LED downlights
  • Fire-rated hoods if separating ceiling
  • Drivers mounted accessibly
  • Lamps / fittings supplied

Common questions

How quickly can you reach a Wells kitchen?

Wells is 6 miles from our Glastonbury base. Same-day callouts for cooker faults, isolation issues or tripping circuits are standard, and we usually survey full kitchen jobs the same week or week after enquiry.

How long does a kitchen rewire take?

Single-circuit jobs (cooker, Quooker, fan) are 1 day. A worktop sockets and LED downlights pair is 1-2 days. Full kitchen refurb electrics (cooker, hob, ring main, lighting, fan) is 2-4 days for first-fix and 1-2 days for second-fix once the units are in. We work to your kitchen fitter's programme.

Do I need a fuse board upgrade for new kitchen circuits?

Often, yes. New circuits in a kitchen — dedicated cooker, induction hob, Quooker spur, additional ring main — all need 30mA RCD protection (typically a per-circuit RCBO). If your existing board is rewireable-fuse, split-load with shared RCDs, or has no spare ways, we'll quote a fuse board upgrade alongside. It's much cheaper to do both at once than retrofit later.

Ready for a quote in Wells?

Free survey, fixed-price written quote, full BS 7671 certification. Call Dan directly on 07889 334849.

07889 334849
Email Us WhatsApp
Call Dan07889 334849 WhatsApp Email
Call Dan — 07889 334849