BA1, BA2 · NAPIT Approved · BS 7671 18th Edition · Part P Notified

Kitchen Electrician
in Bath

Kitchen circuits in Bath (BA1, BA2) — cooker and induction hob radials, dedicated worktop ring main, LED downlights, under-cabinet lighting, Quooker spurs and BS 5839-6 heat detection. Specialist kitchen electrician for Georgian, Victorian and Listed Bath properties — heritage-aware install, BS 7671 18th edition, NAPIT-certified, Part P notified. From £140 + VAT @ 20%.

Call Dan — 07889 334849 Free Site Survey
Or WhatsApp: wa.me/447889334849
Kitchen electrical install in Bath — DS Electrical
NAPIT approved electrical contractorNAPIT
CHAS accredited contractorCHAS
City and Guilds qualified electricianCity & Guilds
TrustMark government endorsedTrustMark
Part P registered electricianPart P
BS 7671 18th Edition compliantBS 7671
What's included

What's wired in a Bath kitchen

Kitchen circuits in Bath (BA1, BA2) — cooker and induction hob radials, dedicated worktop ring main, LED downlights, under-cabinet lighting, Quooker spurs and BS 5839-6 heat detection. Specialist kitchen electrician for Georgian, Victorian and Listed Bath properties — heritage-aware install, BS 7671 18th edition, NAPIT-certified, Part P notified. From £140 + VAT @ 20%.

Full service detail and the eight-circuit kitchen brief on our parent Kitchen Electrics page.

Local Knowledge

Why kitchens in Bath are different

Bath is a UNESCO World Heritage Georgian conservation city — kitchen wiring here often runs through 600mm ashlar stone walls, around lath-and-plaster ceilings and behind original cornice. Cable routes need planning before chases are cut, and Listed-property work means careful coordination with conservation officers.

Bath properties are typically older stock with original wiring still in service. Pulling new circuits for an induction hob, Quooker and worktop ring main usually triggers a consumer unit upgrade alongside, since pre-2015 boards rarely have spare ways. We plan first-fix at carcass stage to keep finishing costs down.

Heavy rental and holiday-let market — kitchen rewires often coincide with a 5-yearly EICR. We can do both visits as one job and issue all certs together.

Sister city pages: EICR in Bath · Rewires in Bath

Indicative pricing · from · VAT extra

Pricing ladder for Bath

Final price depends on access, cable routes, existing wiring and whether the room is being refurbed at the same time. Survey is free; written quote is fixed. Read the disclaimer below the cards before assuming.

Quick

Boiling-water-tap circuit + isolator

from £140
+ VAT @ 20% · from
  • Dedicated 13A spur
  • Above-worktop isolator switch
  • Fused connection unit behind cabinet
  • Minor Works Certificate
Quick

Extractor fan circuit + isolator

from £140
+ VAT @ 20% · from
  • Mains-isolated cooker hood spur
  • Switched fused connection unit
  • Run-on timer where required
  • Minor Works Certificate
Standard

Under-cabinet LED + driver

from £220
+ VAT @ 20% · from
  • LED strip or bar under wall units
  • Driver in vented top cupboard
  • Worktop or sensor switching
  • Lamps / driver supplied
Standard

Cooker circuit (replace existing 32A)

from £220
+ VAT @ 20% · from
  • Like-for-like 32A radial replacement
  • 4mm or 6mm cable to suit cooker
  • 45A cooker control unit
  • Minor Works or EIC issued
Standard

Worktop sockets (4 new doubles)

from £280
+ VAT @ 20% · from
  • 4× double sockets, USB optional
  • Spurred from kitchen ring main
  • Min 300mm clear of sink edge
  • Minor Works Certificate
Standard

LED downlights (6 lights)

from £380
+ VAT @ 20% · from
  • 6× sealed dimmable LED downlights
  • Fire-rated hoods if separating ceiling
  • Drivers mounted accessibly
  • Lamps / fittings supplied
Refurb

Full kitchen refurb electrics

from £750
+ VAT @ 20% · from
  • Cooker, hob, ring main, lighting, fan
  • 1st & 2nd fix to suit fitter's programme
  • Integrated-appliance isolators
  • EIC + Part P notification via NAPIT
FAQ

Common questions

Can you work in a Listed kitchen in Bath without conservation issues?

Yes. We've done kitchen rewires in Listed Georgian townhouses across central Bath. The approach is: minimal-intervention cable routes (under floorboards, in joist voids, behind existing skirting), surface clip-direct on stone walls where chases would damage fabric, and full coordination with the conservation officer or your architect before first-fix. We document everything for the LBC application.

How long does a kitchen rewire take?

Single-circuit jobs (cooker, Quooker, fan) are 1 day. A worktop sockets and LED downlights pair is 1-2 days. Full kitchen refurb electrics (cooker, hob, ring main, lighting, fan) is 2-4 days for first-fix and 1-2 days for second-fix once the units are in. We work to your kitchen fitter's programme.

Do I need a fuse board upgrade for new kitchen circuits?

Often, yes. New circuits in a kitchen — dedicated cooker, induction hob, Quooker spur, additional ring main — all need 30mA RCD protection (typically a per-circuit RCBO). If your existing board is rewireable-fuse, split-load with shared RCDs, or has no spare ways, we'll quote a fuse board upgrade alongside. It's much cheaper to do both at once than retrofit later.

Ready for a quote in Bath?

Free survey, fixed-price written quote, full BS 7671 certification. Call Dan directly on 07889 334849.

07889 334849
Email Us WhatsApp
Call Dan07889 334849 WhatsApp Email
Call Dan — 07889 334849